SB5242
Flow meter with fast response and display
SBG11KL0FRKG
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SB5242-00 — 13.04.2023 —
Product characteristics
Measuring range 0.6...15 l/min 0.036...0.9 m³/h 9.6...237.8 gph 0.16...3.965 gpm
Process connection
threaded connection G 1 Internal thread
Application
System
gold-plated contacts
Media
Liquids; oils (viscosity 150 mm²/s at 40 °C)
Medium temperature [°C]
-10...100
Pressure rating 100 bar 10 MPa
Note on pressure rating at medium temperature >70°C: 80 bar / 8 MPa
SB5242
Flow meter with fast response and display
SBG11KL0FRKG
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SB5242-00 — 13.04.2023 —
Electrical data
Operating voltage [V]
18...30 DC; (to SELV/PELV)
Current consumption [mA]
< 50
Protection class
III
Reverse polarity protection
yes
Power-on delay time [s]
< 3
Outputs
Total number of outputs
2
Output signal
switching signal; analog signal; frequency signal; IO-Link
Max. voltage drop switching
output DC
[V]
2
Max. current load per output [mA]
150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature)
Analog current output [mA]
4...20
Max. load [Ω]
500
Short-circuit protection
yes
Overload protection
yes
Frequency of the output [Hz]
0...10000
Measuring/setting range
Measuring range 0.6...15 l/min 0.036...0.9 m³/h 9.6...237.8 gph 0.16...3.965 gpm
Display range 0...18 l/min 0...1.08 m³/h 0...285.4 gph 0...4.755 gpm
Resolution 0.01 l/min 0.001 m³/h 0.1 gph 0.001 gpm
Set point SP 0.1...15 l/min 0.006...0.9 m³/h 1.6...237.8 gph 0.025...3.965 gpm
Reset point rP 0...14.9 l/min 0...0.894 m³/h 0...236.2 gph 0...3.935 gpm
Frequency end point, FEP 1...15 l/min 0.06...0.9 m³/h 15.8...237.8 gph 0.265...3.965 gpm
In steps of 0.01 l/min 0.001 m³/h 0.2 gph 0.005 gpm
Frequency at the end point
FRP
[Hz]
10...10000
In steps of [Hz]
10
Measuring dynamics
1:50
Temperature monitoring
Measuring range -10...100 °C 14...212 °F
Display range -32...122 °C -25.6...251.6 °F
Resolution 0.1 °C 0.1 °F
Set point SP -9.3...100 °C 15.2...212 °F
Reset point rP -10...99.3 °C 14...210.8 °F
In steps of 0.1 °C 0.2 °F
Frequency start point, FSP -10...78 °C 14...172.4 °F
Frequency end point, FEP 12...100 °C 53.6...212 °F
Frequency at the end point
FRP
[Hz]
10...10000
Accuracy / deviations
Flow monitoring
Accuracy (in the measuring
range)
± 5 % MEW; (Q > 1 l/min; 20...70 °C Medium temperature)
Repeatability
± 1 % MEW
SB5242
Flow meter with fast response and display
SBG11KL0FRKG
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SB5242-00 — 13.04.2023 —
Temperature monitoring
Temperature drift
0,029 °C / K
Accuracy [K]
3 K (25°C; Q > 1 l/min)
Reaction times
Flow monitoring
Response time [s]
0.01
Damping process value dAP [s]
0...5
In steps of [s]
0.1
Damping for the analog
output dAA
[s]
0...5
In steps of [s]
0.1
Temperature monitoring
Dynamic response T05 / T09 [s]
T09 = 120 (Q > 1 l/min)
Software / programming
Parameter setting options
hysteresis / window; normally open / closed; switching logic; current/frequency
output; damping for the switching output / analog output; display can be rotated and
switched off; standard unit of measurement; process value color; calibration factor
Interfaces
Communication interface
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standard
IEC 61131-9 CDV
Profiles Smart Sensor - SSP 0 Generic Profiled Sensor
Function Device identification
Function Process data variable
Function Device diagnosis
SIO mode
yes
Required master port class
A
Process data analog
2
Process data binary
2
Min. process cycle time [ms]
3.2
Supported DeviceIDs Type of operation DeviceID
default 1043
Operating conditions
Ambient temperature [°C]
0...60
Note on ambient temperature medium temperature < 80 °C
medium temperature < 100 °C: 0...40 °C
Storage temperature [°C]
-15...80
Protection
IP 65; IP 67
Tests / approvals
EMC DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance DIN EN 60068-2-27 20 g (11 ms)
Vibration resistance DIN EN 60068-2-6 5 g (10...2000 Hz)
MTTF [years]
145
SB5242
Flow meter with fast response and display
SBG11KL0FRKG
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SB5242-00 — 13.04.2023 —
UL approval UL approval number I006
File number UL E174189
Pressure equipment directive
sound engineering practice
Mechanical data
Weight [g]
1581
Material
stainless steel (1.4404 / 316L); PBT+PC-GF30;
PBT-GF20; PC; brass chemically nickel-plated
Materials (wetted parts)
stainless steel (1.4401 / 316); stainless steel (1.4404 / 316L);
brass (2.0371); brass chemically nickel-plated; PPS; O-ring: FKM
Process connection
threaded connection G 1 Internal thread
Switching cycles mechanical
10 million
Displays / operating elements
Display Display unit 6 x LED, green
Switching status 2 x LED, yellow
Measured values alphanumeric display, red/green alternating
indication 4-digit
Programming alphanumeric display, 4-digit
Remarks
Remarks Use of 200 micron filtration is recommended.
All data refer to oil with the following nominal viscosity: 150 mm²/s, 40 °C
MW = Measured value
MEW = Final value of the measuring range
Pack quantity
1 pcs.
Electrical connection
Connector: 1 x M12; coding: A; Contacts: gold-plated
SB5242
Flow meter with fast response and display
SBG11KL0FRKG
ifm efector, inc. • 1100 Atwater Drive • Malvern • PA 19355 — We reserve the right to make technical alterations without prior notice. — EN-US — SB5242-00 — 13.04.2023 —
Connection
OUT1:
- Switching output Volumetric flow quantity monitoring
- Switching output Temperature monitoring
- Frequency output Volumetric flow quantity monitoring
- Frequency output Temperature monitoring
- IO-Link
OUT2:
- Switching output Volumetric flow quantity monitoring
- Switching output Temperature monitoring
- analog output Volumetric flow quantity monitoring
- analog output Temperature monitoring
Colors to DIN EN 60947-5-2
Core colors :
BK = black
BN = brown
BU = blue
WH = white
Diagrams and graphs
